Internet Security Router User
’s Manual
Chapter 3. Quick Start Guide
19
•
Host name is optional. You may leave it empty if your ISP did not provide such
information.
•
Enter the user name and password provided by your ISP.
•
Click on
button to save the PPPoE settings.
b) Dynamic IP Connection Mode (see Figure 3.10)
•
You don
’t need to enter primary/secondary DNS IP addresses as DHCP client is able to
automatically obtain this information for you from your ISP. However, if you prefer to use
your favorite DNS servers, you may enter them in the space provided.
•
Host name is optional. You may leave it empty if your ISP did not provide such
information.
•
If you had previously registered a specific MAC address with your ISP for Internet
connections, enter the registered MAC address here and make sure you check the MAC
cloning check box.
•
Click on
button to save the dynamic IP settings.
Figure 3.11. Setup Wizard
– WAN Static IP Configuration Page
c)
Static IP Connection Mode
•
Enter WAN IP address in the IP Address field. This information should be provided by
your ISP.
•
Enter Subnet Mask for the WAN. This information should be provided by your ISP.
Typically, it is 255.255.255.0.
•
Enter gateway address provided by your ISP in the space provided.
Connection
Mode drop-
down list