background image
86
第 7 章 - 疑難排解
華碩 GigaX 系列
7.4.2
通過 TFTP 上傳固件
1. 在控制終端(console)裡,在系統開機自檢時按下任意鍵,以進入
"Boot ROM Command" 模式。
2. 用命令 "c <IP Address> <Netmask>" 來設置 TFTP 客戶端的 IP 地址作
為交換機的 IP 地址,如:“c 192.192.1.100 255.255.255.0”。
3. 用命令 "s <IP Address> <Netmask>" 來設置固件所在的 TFTP 服務器
的 IP 地址,如“s 192.192.1.121 255.255.255.0”。
4. 用命令“u <File Name>”來上傳固件,文件名為位於 TFTP 服務器的
固件的名稱,如:“u gx2024x_2.1.3.2_051026”。
5. 上傳固件後,請使用命令“g”來載入與執行固件。
圖 64. 通過 TFTP 上傳固件
u
- Upload boot module/firmware via network using TFTP protocol
v
- Display boot rom version
w
- Toggle administrator password reset
[Asus OS Boot): u gx2024x_2.1.3.2.051026
Please wait, this takes a while ...
TFTP from server..................................192.192.1.121
Our IP address is.................................192.192.1.100
File name.........................................gx2024x_2.1.3.2_051026
Loading.........................................../
Total Bytes transferred...........................2102720 (2015c0 hex)
Total Bytes Received..............................2102720 bytes
Download Image Type...............................Firmware Image
Checking Download Firmware Checksum...............PASS
Slot for New Firmware.............................0
Erasing Sectors...................................DONE
Program Sectors...................................DONE
Checking New Firmware Checksum Value..............PASS
(Asus OS Boot):g
Firmware Boot Device..............................ON-BOARD FLASH
Configured Boot Slot...............................AUTO
Real Boot Slot....................................0
Verify Firmware Signature.........................PASS
Verify Firmware Checksum..........................PASS
Decompress Firmware...............................DONE
Firmware is Starting at...........................0x100000
Adding 12103 symbols for standalone.
Step 1
>>>>>> ASUS OS Initialization Start (Phase 1)