ASUS GUI RAID Manager: Basic Operations at Startup
3.1
Starting the GUI RAID Manager
3-3
3. Run the GUI RAID Manager on the remote station. If you
are using Windows 95/98 or Windows NT 4.0, follow these
steps:
3a. From the Start menu, select Programs à ASUS GUI
RAID Manager.
-or-
Double-click on the ASUS GUI RAID Manager icon.
The ASUS GUI RAID Manager main window appears
on the screen.
If you are using Windows NT 3.5x, perform these steps:
3a. Open the ASUS GUI RAID Manager group window
from the Program Manager, if not yet open.
3b. From the ASUS GUI RAID Manager group window,
double-click on the ASUS GUI RAID Manager icon.
The ASUS GUI RAID Manager main window appears
on the screen.
4. Connect to the disk array system. For information on how to
connect, see the Connecting and Disconnecting from a Disk
Array System section of this chapter.
4
4Starting the GUI RAID Manager for remote management via
telephone line
1. Ensure that a modem is connected to the RS-232 port of your
SCSI-to-SCSI controller, and to the serial interface of your
GUI RAID Manager station. Check that the baud rates of
the ports and the modems are set accordingly.
2. From the GUI RAID Manager station, dial in the number of
the modem connected to the controller.