8
ASUS PCI-AS300 User’s Manual
W
in3.1x
Audio
Driver
(Audio
Installation)
VIII. Win3.1x Audio Driver
You may choose "Full Installation" to install all components or "Custom Installa-
tion" to toggle DOS: (1) Audio Samples (2) Readme and Common Q&A Files and
WINDOWS: (1) WaveEditor (2) QuickCD. You can select Custom Installation if
you are curious about its options and then go back to the previous screen by pressing
<ESC>. Pressing <ENTER> at the above screen will show the installation paths.
You may change the paths or press <ENTER> again if the paths are correct. Press
<ENTER> to continue so that changes can be made to you system files.
You will be prompted that an addition will be made in your C:\AUTOEXEC.BAT
and C:\CONFIG.SYS files. The typical PC will have these settings added to the
system files:
C:\AUTOEXEC.BAT
SET BLASTER=A220 I5 D1 H5 P330 T6
SET SOUND=C:\VIBRA16
SET MIDI=SYNTH:1 MAP:E
C:\VIBRA16\DIAGNOSE /S /W=C:\WINDOWS
C:\VIBRA16\MIXERSET /P /Q
C:\CONFIG.SYS
FILES=40 (If less than 40 or does not exist)
If you wish to use the "Play" and "Record" utility located in \VIBRA16\ directory in
DOS mode, you must also add the following two lines through "Custom Installa-
tion."
D
EVICE=C:\VIBRA16\DRV\VIBRA16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 H:5
DEVICE=C:\VIBRA16\DRV\CTMMSYS.SYS