background image
Chapter 2: Hardware setup
Chapter 2: Hardware setup
Chapter 2: Hardware setup
Chapter 2: Hardware setup
Chapter 2: Hardware setup
2-38
2-38
2-38
2-38
2-38
To install a floppy disk drive:
1.
Position the floppy drive
vertically with the eject button
on the left side (close to the
HDDs).
2.
Connect the drive signal cable
and power cable.
4.
Secure the drive cage with a
screw.
3.
Carefully push the drive into the
bay until the drive cage fits the
front edge of the bay.
Floppy drive power cable
Floppy drive power cable
Floppy drive power cable
Floppy drive power cable
Floppy drive power cable
Floppy drive signal cable
Floppy drive signal cable
Floppy drive signal cable
Floppy drive signal cable
Floppy drive signal cable
Red stripe to match Pin 1 on
Red stripe to match Pin 1 on
Red stripe to match Pin 1 on
Red stripe to match Pin 1 on
Red stripe to match Pin 1 on
the connector
the connector
the connector
the connector
the connector