Page 103

ASUS TS300-E3

5-17

Type [Auto]

Selects the type of IDE drive. Setting to [Auto] allows automatic selection

of the appropriate IDE device type. Select [CDROM] if you are specifically

configuring a CD-ROM drive. Select [ARMD] (ATAPI Removable Media

Device) if your device is either a ZIP, LS-120, or MO drive.

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode

if the device supports this mode, and if the device was not previously

formatted with LBA mode disabled. Configuration options: [Disabled]

[Auto]

Block (Multi-sector Transfer) [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the

data transfer from and to the device occurs multiple sectors at a time if

the device supports multi-sector transfer feature. When set to [Disabled],

the data transfer from and to the device occurs one sector at a time.

Configuration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0]

[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]

[UDMA1] [UDMA2]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]