Chapter 4: Motherboard information
4-6
4.. Keyboard.power.(3-pin.KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Spacebar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
®
DSBF-DE/1U/1U Series Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
3
2
2
1
5.. Intel®.6321ESB.SATA.port.S/W.RAID.setting.(3-pin.RAID_SEL1)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Both utilities are supported by the
Intel® 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps
on pins 2-3 to use the Intel® Matrix Storage Manager (MSM).
®
DSBF-DE/1U Series RAID setting
RAID_SEL1
1
2
2
3
Intel
LSI
(Default)