Chapter 4: Motherboard information
Chapter 4: Motherboard information
Chapter 4: Motherboard information
Chapter 4: Motherboard information
Chapter 4: Motherboard information
4-6
4-6
4-6
4-6
4-6
5.
5.
5.
5.
5.
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
6.
6.
6.
6.
6.
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
Gigabit LAN1 controller setting (3-pin LAN1_EN1)
This jumper allows you to enable or disable the Intel® 82547GI Gigabit
LAN controller (CSA) that controls the LAN1 port. Place a jumper cap
on pins 1-2 to activate the Gigabit LAN1 controller.
•
The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
•
The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
®
NCL-DSR1
NCL-DSR1 Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
12
23
®
NCL-DSR1
NCL-DSR1 LAN1_EN setting
LAN1_EN1
Enable
(Default)
Disable
3
2
2
1