ASUS RS160-E2/CS3
ASUS RS160-E2/CS3
ASUS RS160-E2/CS3
ASUS RS160-E2/CS3
ASUS RS160-E2/CS3
6-9
6-9
6-9
6-9
6-9
Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1.
Follow steps 1 to 2 of the Creating a RAID 0 set
Creating a RAID 0 set
Creating a RAID 0 set
Creating a RAID 0 set
Creating a RAID 0 set section.
2.
Select RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)from the Select RAID Type
Select RAID Type
Select RAID Type
Select RAID Type
Select RAID Type menu,
then press <Enter>.
3.
Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An X
X
X
X
X mark appears after the selected HDD.
4.
Follow step 3 to select the other members of the RAID set, then press
<Enter> when finished.
Refer to the Striping Requirements
Striping Requirements
Striping Requirements
Striping Requirements
Striping Requirements note at the bottom of the
screen to determine the number of hard disk drives required for
the selected RAID type.