59
ASWM for Linux
Chapter 5 : ASWM Software for Linux
This is only motherboard port information and will
not change.
The power supply information will show:
Power 1 / Power 2: (if available) with
Not Available, Offline, Online
If the power cord is unplugged, a red “x” will
appear over the power cord, if the power supply
fails, red “x” will appear over power supply and
power cord because either or both may have a
problem.
(2) System Summary Front View
The backplane can detect the presence of hard disk drives (not the
hot swap tray) and display pictures with an empty bay. Because it’s
hard to show no hard drives while in the hot swap tray, the pictures
will also show the trays removed even if you did not remove them.
The Backplane will show the model name, temperature (˚C), and the default drive bay’s status. The default
safe upper temperature for the drive disk bays is 60˚C. When the temperature exceeds the set threshold, a
warning will be given by flashing icons. NOTE: The temperature unit (˚C) cannot be changed. To convert to
(˚F), please see the appendix at the end of this manual.
NOTE: The values shown in this section are for reference purposes
only and may not reflect the values shown by your system. The
pictures shown will vary depending on server model and configuration.
(3) System Summary Rear View
The rear view has two hot spots; the connectors and power supply