25
ASWM for Windows
Chapter 3 : ASWM Software for Windows
The rear view has two hot spots; the connectors and power supply
This is only motherboard port information and will
not change.
The power supply information will show:
Power 1 / Power 2: (if available) with Normal
Status, Warning, Critical Status
Power Fan will show: Normal, Warning, Critical
If the power cord is unplugged, a red “x” will
appear over the power cord, if the power supply
fails, red “x” will appear over power supply and
power cord because either or both may have a
problem.
Yellow text are warnings. Red text are critical items.
(2) System Summary Front View
The backplane can detect the presence of hard disk drives (not the
hot swap tray) and display pictures with an empty bay. Because it’s
hard to show no hard drives while in the hot swap tray, the pictures
will also show the trays removed even if you did not remove them.
The Backplane will show the model number, number of disks (1, 2, 3), and temperature (˚C). The default
safe upper temperature for the hard disk bays is 50˚C. When the temperature exceeds the set threshold, a
warnings will be given by yellow text and critical events by red text, both with flashing icons.
NOTE: The temperature unit (˚C) cannot be changed. To convert to (˚F), please see the appendix at the
end of this manual.
NOTE: The values shown in this section are for reference purposes
only and may not reflect the values shown by your system. The
pictures shown will vary depending on server model and configuration.
(3) System Summary Rear View