User’s Manual
A-11
The system continuously beeps
after it was turned on
1. Check the memory modules
and make sure you installed
the correct DIMMs the system
supports.
2. Make sure that the DIMMs are
properly installed on the
sockets.
3. Check if it has VGA output.
The message “Non-system disk
or disk error” appears
1. Check if a bootable HDD is
active.
2. Check if the HDDs are properly
installed and connected to the
SCSI connectors on the
backplane.
Network connection not
available
1. Make sure the network cable is
connected to the RJ-45 port on
the rear panel.
2. Make sure that you have
installed the network drivers from
the system support CD.
Problem
Action