background image
ASUS AP1600R-E2 (AA2/AI2)
6-19
6.1.4.6
6.1.4.6
6.1.4.6
6.1.4.6
6.1.4.6 Rebuilding a RAID set
Rebuilding a RAID set
Rebuilding a RAID set
Rebuilding a RAID set
Rebuilding a RAID set
The utility displays the condition of the RAID set during the POST. When a
RAID set is degraded, you can use the utility to rebuild it.
To rebuild a RAID array:
1.
Enter the Adaptec RAID Configuration Utility following the instructions
in the section “Creating a RAID 0 (Stripe).”
2.
Select Array Configuration Utility from the initial menu, then press
<Enter>.
Check the physical connections of the SATA hard disk drives before you
rebuild a degraded RAID set. Check the system and motherboard user
guide for additional information.
3.
From the main menu, highlight Manage Arrays, then press <Enter> to
display the installed RAID sets.
4.
Highlight the degraded RAID set, then press <Enter> to display the
array properties. The Array Status shows DEGRADED.