background image
ASUS PCI-DA2100 Application Note
5
Chapter 2 Installation
2.1 How to install DA2100 on the P/I-P65UP8 M/B.
The PCI-DA2100 requires a minimum of 4MB of 72-pin 60ns FPM SIMM module
or EDO SIMM module, 8MB is recommended.
The PCI-DA2100 plug into PCI Slot1 is recommended because the IRQ resources
are limited. The following table shows the IRQ routing usage in P/I-P65UP8 M/B, if
using other PCI card on shared slots, make sure that the drivers support “Share IRQ”
or that the cards do not need IRQ assignments.
Table of INT Router
Host
System INTA# System INTB# System INTC# System INTD#
PCI Slot 1
Card INTA#
Card INTB#
Card INTC#
Card INTD#
PCI Slot 2
Card INTD#
Card INTA#
Card INTB#
Card INTC#
PCI Slot 3
Card INTC#
Card INTD#
Card INTA#
Card INTB#
Onboard VGA
X
X
INTA#
X
AIC7880 SCSI
X
INTA#
X
X
i960 Processor
X
X
X
INTA#
2nd-PCI Slot 1
Card INTB#
Card INTC#
Card INTD#
Card INTA#
2nd-PCI Slot 2
Card INTA#
Card INTB#
Card INTC#
Card INTD#
2nd-PCI Slot 3
Card INTD#
Card INTA#
Card INTB#
Card INTC#
2nd-PCI Slot 4
Card INTC#
Card INTD#
Card INTA#
Card INTB#
Symbios SCSI
Ch. 2 INTB#
X
X
Ch. 1 INTA#
P.S. Using INTA#, if your PCI cards has only one INT# signal.
Primary
PCI Slot1
P/I-P65UP8 MainBoard