background image
ADSL Modem/Router User’s Guide
8
2. Installation
2.3.1 Front Panel
POWER
STATUS
TEST
LINE
PC
4
POWER
STATUS
LINE
PC
12
3
5a
USB
5b
ADSL Modem (USB Combo)
ADSL Modem
2.3 Installing the ADSL Modem/Router
LED Indicator
State
Description
1. Power LED
ON
Modem is powered ON
OFF
Modem is powered OFF
2. Status LED
ON
“Showtime”—successful connection between
(ADSL Line Status)
ADSL modem and telephone company’s network
Flashing
“Handshaking”—modem is trying to establish a
connection to telco’s network
OFF
“Down”—ADSL line is inactivated
3. Line LED (WAN)
Flashing
Data transmitting between modem and telco’s network
4. PC Link LED (LAN) ON
Successful connection between LAN and PC
(LAN Traffic LED)
Flashing
Data transmitting between LAN and PC
OFF
No connection between LAN and PC*
5a.Test
OFF
Normal operation
5b.USB
ON
USB and PC connected successfully
Flashing
Data transmitting between USB and PC
OFF
No connection between USB & PC, or USB driver not ready
* Check if the Ethernet cable is properly connected and the HUB-PC switch is in the correct position.
2.3.2 Rear Panel
Phone
Line
1
23
5
7
6
9
ON
OFF
USB
Power
HUB
PC
LAN
Console
Reset
4
8
LED Indicator
Description
1. Line Connector
RJ11 connector, connected to an ADSL network
2. Phone Port (optional)
RJ11 connector, connected to telephone set
3. Reset Switch
Restart the modem/router
4. Console Port
9-pin D-sub serial port for RS-232 console management
5. LAN Port
RJ45 connector, connected to the user’s LAN
6. HUB-PC Switch (optional)
Controls the modem to PC crossover function
7. USB Port (optional)
Connects to computers without a LAN port
8. Power Input Jack
Power input, power supply to modem/router
(must use the supplied power adapter)
9. Power Switch (optional)
Turns ON or OFF the modem/router